How To Use A Paintless Dent Repair Kit (Note: Spacers Not Included, Product Only T Puller) 1. Clean the dent with a clean damp cloth; 2. Put the glue stick into the glue gun, pull the trigger to let the glue stick enter the glue gun, turn on the power and preheat for 5 minutes; 3. Use suitable wire drawing gaskets. Large dents require large brushed spacers. (Note: the larger the The larger the tension gasket, the larger the tension); 4. Pull the trigger and apply the brushed gasket with extrusion glue 5. Quickly place the brushed gasket in the center of the dent with hot melt glue, press gently until the glue solidifies and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes, and should be slightly shorter than in winter); 6. Align the T-shaped trimmer, press the wire drawing gasket with hot melt adhesive, and pull the slide bar back to pull up the dent; 7. Check with the circuit board. If the dent remains, tap lightly with a flattening hammer or pen; 8. Clean the repaired place with a clean damp cloth.
Name: Dent Repair Tool T Puller Material: Alloy Weight: 760g Packing method: foam pack Packing size: 34 x 11 x 9cm Packing list: 1 x Dent Repair Tool T Puller Note: 1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding. 2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.
IMPORT: THIS ITEM IS SHIPPED FROM CHINA. PLEASE EXPECT UP TO 25 DAYS FOR DELIVERY
SHIP FROM : China SHIP TO : USA, CANADA Average Shipping days: 4
