12V 3.6A Or 12V/0.8A Car Motorcycle Battery Charger Ac Input 100-240v Eu Uk Us Plug U.S. Plug

Name: Car Battery Charger
Battery type: Most types of batteries include calcium, gel and AGM, wet batteries
Exchange technology: Yes
Polarity protection: yes
Short output protection: Yes
Non-battery link protection: Yes
Overvoltage protection: Yes
Over temperature protection: Yes
Cooling: Natural convection
Minimum starting voltage: 8.0V
The 5 stages are: desulfurization; volume; absorption; float, automatic cut-off
Battery series: 4-100Ah
Thermal protection: 65C+/-5C
Efficiency: APP. 85%
Compliant with standards: CB, CE, IEC 60335, EN 61000, EN 55014
Dimensions (L×W×H): 170×65×40 mm
Weight: 450g
Motorcycle: for 5Ah-60AH; Car: for 20AH -100AH
Microprocessor control (CPU).
1. Desulphation
The Desulphation stage may break down sulphation that occurs in batteries that have been left flat for extended periods of time, returning them back to full charge. sulphation occurs when lead-sulphate hardens and clogs up the battery cells.
2. Bulk (Constant Current)
Bulk mode charges the battery at the maximum rate (constant current) putting a large amount of power into the battery in a short amount of time. This stage will charge the battery to approximately 60%, until the voltage reaches 14.7 volts for 12V charger
3. Absorption (Constant Voltage)
The charge rate slows down so the battery can absorb more power and reach 80% charge. The voltage remains at a constant 14.7 volts for 12V charger while the current is gradually reduced until no more power can be added without over-charging the battery.
4. Float
The Float stage maintains the battery at 100% charge without overcharging or damaging the battery. This means the charger can be left connected to the battery indefinitely.
5. Stop-The Charger stop charging and cut-off output.
Packing list:
1pc * Car Battery Charger
Note: All images and descriptions are for illustrative purposes only, the color deviation is subject to actual system configuration.